የመድኃኒት ፒቲፒ አልሙኒየም ፎይል ለማምረት እንዴት ዋስትና እንደሚሰጥ?

ቤት

የመድኃኒት ፒቲፒ አልሙኒየም ፎይል ለማምረት እንዴት ዋስትና እንደሚሰጥ?

በዕለት ተዕለት ሕይወት ውስጥ, የሕክምና አልሙኒየም ፎይል አተገባበር በጣም ሰፊ እና ብስለት ነው, በመድኃኒት ቤቶች ውስጥ ያለው አጠቃላይ የመድኃኒት እሽግ በአብዛኛው በአሉሚኒየም ፊውል ማሸጊያ ውስጥ ነው. The main uses of medicine foil areas capsules, ጽላቶች, ፊኛ ማሸጊያ, and powder particles, water bag packaging. Pharmaceutical foils are stable in chemical and physical characteristics and can be directly contacted as food grade. በዚህ ምክንያት, the country has strict requirements on the appearance and performance of pharmaceutical foils, and every step of the production process of pharmaceutical foils needs to be strictly controlled.

The packaging materials of general pharmaceutical PTP aluminum foil are mostly 8011 alloy foil with a thickness of 0.02mm and an alloy state of H18. The general process is as follows: billet inspection → rolling → rolling → rolling → cutting → checking, packing, and warehousing. 3 ሚ.ሜ(H14) →0. 145 mm→01072mm→0. 032 mm→2 × 0.02 ሚ.ሜ(H18). The first and second processes are rolled on roughing mill (roll crown is 0. 09 ሚ.ሜ, Ra value is 0. 3μm). The third and fourth passes are rolled on the middle roll (roll crown is 0. 10 ሚ.ሜ, Ra value is 0. 15μm), which can be modded according to specific product requirements. The rolling time of each process is also different.

የመድሃኒት ፎይል የማምረት ሂደት

The main process of foil production is simply to effectively fuse various materials under the control of certain technological parameters. በዚህ ሂደት ውስጥ, the adhesive coating on the surface of the original aluminum foil film, film quality can directly affect the heat sealing strength of the product. በዚህ ሂደት ውስጥ, the more important parameters include the speed of coating, the temperature of the section of the drying road, ቅርጹን, ጥልቀት, line number, and the position and angle of the scraper of the coating roller.

In the whole process, the coating speed determines the drying time of the coating in the drying channel. If the coating speed is too fast and the drying temperature is too high, the solvent on the coating surface will evaporate too fast, በፊልም ውስጥ ያለውን የተረፈውን መሟሟት ያስከትላል. The drying of the coating is not enough, and it is difficult to form a dry and strong adhesive layer. This situation is easy to affects the heat sealing strength of the product, resulting in adhesion between different product layers.

During the processing of the applicator roll checker shape, ጥልቀት, line number, and the location of the scraper, Angle determines the thickness of the coating film and uniformity, the process, if the choice on the selection of inappropriate or adjust has deviation, glue cannot be evenly coated in the original aluminum foil membrane caused by uneven surface, this will affect the heat sealing effect of the products, The strength of aluminum foil produced will also be affected. በዚህ ጉዳይ ላይ, it is likely that it will be difficult to meet the qualified standard coating worldwide, the general difference should be less than ±12.5%. ስለዚህ, it is necessary to complete the process of coating the adhesive layer in strict accordance with the parameters specified by the factory, so as to ensure that the film is uniform and strong.

የቀድሞ ገጽ:
ቀጣይ ገጽ:

ተገናኝ

ቁጥር 52, ዶንግሚንግ መንገድ, ዠንግዡ, ሄናን, ቻይና

+86 18137782032

[email protected]

ምላሽ ይተው

የኢሜል አድራሻዎ አይታተምም።. አስፈላጊ መስኮች ምልክት ተደርጎባቸዋል *

ትኩስ ሽያጭ

ተዛማጅ ምርቶች

8021 O alu alu for ለህክምና ጥቅል
8021 O alu alu for ለፋርማሲ
የአልሙኒየም ብጉር ፎይል ለፋርማሲ ማሸጊያ
ለአሉሚኒየም ብጉር ማቅረቢያ ቀዳዳዎች እና ጡባዊዎች
25 ማይክሮን አልሙኒየም ፎይል
25 ማይክ አልሙኒየም ፎይል ለፋርማሲ
ቀዝቃዛ የአሉሚኒየም ፎይል
የ PVC አል ቅልቅል ፊልም ከአሉሚኒየም ፎይል ጋር

ጋዜጣ

ምላሽ ይተው

የኢሜል አድራሻዎ አይታተምም።. አስፈላጊ መስኮች ምልክት ተደርጎባቸዋል *

© የቅጂ መብት © 2023 Huawei Prma Foil ማሸጊያ

WhatsApp / wechat
+8618137782032
WhatsApp ዌልቲ

[email protected]